MEASURED FOR 2-3/8 IN. POSTS
The formed clamp is sized for round steel terminal posts with a 2-3/8-inch outside diameter.
BUILT FOR THE JOBProduct support →
HOT-DIP GALVANIZED
FENCE HARDWARE | 2-3/8" POST FIT
2-3/8" STEEL-TO-WOOD FENCE BRACKETS
Connect wood rails to round metal terminal posts for new fence builds, reinforcement and everyday repairs. Fasteners are included.
✓Galvanized after production for full-surface coverageSee details
$39.99Project pack | fasteners included
MOQ: 3 unitsETA: Within 10 days from order date
- Fits 2-3/8" outside-diameter steel terminal posts
- Hot-dip galvanized after production for broad surface coverage
- Supports 90°, 45° and custom-angle fence layouts
- Suitable for new construction, reinforcement and repairs
FAST US SHIPPINGReliable delivery30-DAY RETURNSStraightforward supportSECURE PAYMENTSCards, wallets & PayPal
GALVANIZED AFTER PRODUCTION
Hot-dip galvanizing covers cut edges and formed surfaces after the bracket has been manufactured.
FLEXIBLE RAIL ANGLES
Use the bracket for straight 90-degree runs, 45-degree corners or irregular fence layouts.
STEEL POST | WOOD RAIL
KEEP THE POST | REBUILD THE FENCE
The bracket creates a practical connection between round metal posts and wood rails. It is suited to new builds and repairs where replacing a sound steel post would add unnecessary work.
✓ 2-3/8" outside-diameter fit✓ Wood-rail mounting plate✓ One-person installation✓ Fasteners included
Measure the pipe's outside diameter before ordering. Nominal pipe size and outside diameter are not always the same.SIMPLE INSTALLATION
MEASURE | POSITION | FASTEN
Confirm the post's outside diameter before purchase, then set the rail angle and tighten the supplied hardware.
- 01MEASURE THE POSTConfirm a 2-3/8-inch outside diameter with a tape or caliper.
- 02SET THE BRACKET ANGLEPosition the clamp and wood plate for the rail direction you need.
- 03TIGHTEN AND FASTENSecure the clamp to the post, then attach the wood rail through the mounting plate.
WIDE APPLICATION
BUILT FOR REAL FENCE REPAIRS
Use the galvanized bracket for daily repairs, reinforcement, new construction and transitions from metal posts to wood rails - even where the fence line changes direction.
NEW FENCE BUILDSDAILY REPAIRSWOOD RAILSSTEEL TERMINAL POSTSODD-ANGLE LAYOUTS
PRODUCT INFORMATION
WHAT YOU NEED TO KNOW
- Product
- Steel-to-Wood Fence Bracket
- Post fit
- 2-3/8" outside-diameter round steel posts
- Material
- Steel
- Finish
- Hot-dip galvanized after production
- Bracket size
- Approximately 6" × 4.65" × 2"
- Angles
- 90°, 45° and custom-angle layouts
- Pack options
- 12 brackets or 24 brackets
- In the box
- Fence brackets, bolts, nuts and mounting screws
SUPCONN MEMBER RATINGS
RATE THE BUILD
NEWBe the first member to rate it
RECENT MEMBER NOTES
Member center →No member notes yet. Start the first project conversation.
COMMON QUESTIONS
BEFORE YOU BUILD
How do I confirm the bracket will fit my post?
Measure the post across its widest point. The required outside diameter is 2-3/8 inches.
Can I use the bracket on a corner?
Yes. The design supports 90-degree, 45-degree and other rail angles for irregular layouts.
Are the fasteners included?
Yes. Both pack options include the bracket hardware and screws required for installation.
Is the finish suitable for outdoor fencing?
The brackets are hot-dip galvanized after production to provide broad corrosion-resistant coverage for outdoor fence work.
PROJECT SUPPORT
NOT SURE IT FITS?
Send us a photo of the post, its measured outside diameter and the rail direction. We'll help confirm fit and pack size before you order.
12 Brackets$39.99